
55
Table 2-26 Set trigger mode to slope trigger function menu 1
Option Setting Instruction
Type Alternative
The trigger signal comes from two vertical
channels when you use alternative trigger. In this
mode, you can observe two irrelative signals at
the same time.
Channels
CHX-CHY
Select any two channels from CH1, CH2,CH3,
CH4 as source for alternative trigger.
Source
CHX
CHY
Set trigger type information for CHX signal
Set trigger type information for CHY signal
Mode Slope
Set trigger type of the vertical channel signal to
slope trigger.
When
Select slope trigger condition.
Next
Page
Page 1/2 Enter the second page of the alternative trigger.
Table 2-27 Set trigger mode to slope trigger function menu 2
Option Setting Instruction
Time
〈Set time〉
Turn the “Universal” knob to set the slope time.
Time setup range is 20ns-10s.
Vertical
Select the trigger level that can be adjusted by
“LEVEL” knob. You can adjust “LEVEL A”,
“LEVEL B” or adjust them at the same time.
Set up Enter the “Trigger setup menu”(see table 2-14).
Next
Page
Page 2/2 Return the first page of “Alternative trigger
menu”.
Operate Instruction:
Observe two irrelative channel signals, follow these steps:
1. Input two irrelative signals to channel 1and channel 2.
2. Press the AUTO button.
3. Press the TRIG MENU button to enter “trigger menu”.
Note:X,Y represent CH1,CH2,CH3 and CH4 respectively, but X and Y can’t represent the
same signal source.
Komentáře k této Příručce