SIGLENT SDS1000D Uživatelský manuál stáhnout pdf (Strana 22)

2.1 Menu and control button

Showing as the following picture:

Picture 2-1

All models:

■

Channel buttons(CH1,CH2,CH3,CH4): Press a channel button(CH-4) to turn that

channel ON or OFF and open the Channel menu for that channel. You can use the

channel menu to set up a channel. When the channel is ON. The channel button is lit.

■

MATH: Press to display the Math menu. You can use the MAH menu to use the

oscilloscopes Math functions.

■

REF: Press to display the Ref Wave menu. You can use this menu to save and recall

four or two reference waveforms internal memory.

■

HORI MENU: Press to display the Horizontal menu. You can use the Horizontal menu

to display the waveform and to zoom a segment of a waveform.

■

TRIG MENU: Press to display the Trigger menu. You can use the Trigger menu to set

the trigger type(Edge. Pulse, Video, Slope, Alternative) and trigger settings.

■

SET TO 50%: Press to stabilize a waveform quickly. The oscilloscope can set the

trigger level to be halfway between the minimum and maximum voltage level

automatically. This is useful when you connect a signal to the EXT TRIG connector

and set the trigger source to Ext or Ext/5.

■

FORCE

Use the FORCE button to complete the current waveform acquisition

whether the oscilloscope detects a trigger or not. This is useful for Single

acquisitions and Normal trigger mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 153 154

Žádné komentáře

SIGLENT SDS1000D Uživatelský manuál Strana 22